Code Scrubber‎ > ‎

User Guide

  •   Press the button once to disable or enable the unit.
    • If the LED is on, it is enabled.
    • If the LED is off, it is disabled.
    • You can leave the unit enabled at all times or turn it off when you don't need it.
  •  You can also hold down the button for greater than 5 seconds to clear your PCM's error codes and check engine light.
    • This can only be done while the key is in the on position and the car is NOT running.
    • If the code clearing is successful, the LED on the unit will blink twice.